Skip to content

Support



Juniper was the first North American IP routing vendor to achieve the prestigious TL 9000 certification by the Quality of Excellence for Suppliers of Telecommunications (QuEST) Forum in the router category, for design, development, provision and service and support.



What is J-Care?

It's the world-class service and support that you expect from a company that delivers the industry's best infrastructure and security products. With J-Care, you now have the confidence knowing that Juniper will do our part to keep you on top of the world!


EX-series Switch—Console Port Connector Pinout Information

The console port on the rear panel of an EX-series switch chassis has an RJ-45 connector. Table 1 provides the pinout information for the RJ-45 chassis console connector. An RJ-45 cable and an RJ-45 to DB-9 serial port adapter are supplied with the switch.

Note: If your laptop or PC does not have a DB-9 male connector pin and you want to connect your laptop or PC directly to an EX-series switch, use a combination of the RJ-45 to DB-9 female adapter supplied with the switch and a USB to DB-9 male adapter.

Table 1: Console Port Connector Pinout Information

Pin

Signal

Description

1

RTS Output

Request to send

2

DTR Output

Data terminal ready

3

TxD Output

Transmit data

4

Signal Ground

Signal ground

5

Signal Ground

Signal ground

6

RxD Input

Receive data

7

CD Input

Data carrier detect

8

CTS Input

Clear to send