Steel Belted Radius Carrier 7.0 Installation Guide > About This Guide > Documentation Conventions

Documentation Conventions

Table 1 defines notice icons used in this guide.

Table 1: Notice Icons 

Icon	Meaning	Description
	Informational note	Indicates important features or instructions.
	Caution	Indicates a situation that might result in loss of data or hardware damage.
	Warning	Alerts you to the risk of personal injury.

Table 2 describes the text conventions used throughout this manual.

Table 2: Text and Syntax Conventions 

Convention	Description	Examples
Text Conventions
Bold text like this	Represents commands and keywords in text.	Issue the clock source command. Specify the keyword exp-msg.
Bold text like this	Represents text that the user must type.	host1(config)#traffic class low-loss1
Fixed-width text like this	Represents information as displayed on your terminal's screen.	host1#show ip ospf 2 Routing Process OSPF 2 with Router ID 5.5.0.250 Router is an Area Border Router (ABR)
Italic text like this	Emphasizes words. Identifies variables. Identifies chapter, appendix, and book names.	There are two levels of access, user and privileged. clusterId, ipAddress. Appendix A, System Specifications.
Plus sign (+) linking key names	Indicates that you must press two or more keys simultaneously.	Press Ctrl+b.
radiusdir	Represents the directory into which Steel-Belted Radius Carrier has been installed. The default location is /opt/JNPRsbr/radius on Solaris systems, but any location may be specified during installation.	Change directories to /radiusdir
Syntax Conventions
Plain text like this	Represents keywords.	terminal length
Italic text like this	Represents variables.	mask, accessListName
< > (angle brackets)	Enclose a list of possible selections.	<add | replace>
| (pipe symbol)	Represents a choice to select one keyword or variable in a list of choices that is separated by the pipe symbol.	diagnostic | line In this example, you must specify add or replace but cannot specify both: <add | replace> = Attribute [,Attribute]
[ ] (brackets)	Represent optional keywords or variables.	[ internal | external ], or <add | replace> = Attribute [,Attribute], where the second attribute is identified as optional by the brackets. When they are used in a configuration files brackets identify a section of the file. In scripts or in operating system commands, brackets indicate the default response or entry.
[ ]* (brackets and asterisk)	Represent optional keywords or variables that can be entered more than once.	[ level1 | level2 | l1 ]*
{ } (braces)	Represent required keywords or variables.	{ permit | deny } { in | out } { clusterId | ipAddress }