ccagw.ini File

[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]

Steel Belted Radius Carrier 7.0 Reference Guide > Operations Files > ccagw.ini File
ccagw.ini File

The ccagw.ini file contains information about 3COM CCA gateways. You must configure a [gateway] section for each 3COM CCA gateway to enable the return of required CCA tunnel attributes.

[gateway] section

Each [gateway] section of the ccagw.ini file (Table 8) contains information about a specific 3COM CCA gateway.
[Jupiter-Gateway]
Address = 200.47.98.142
TunnelRefresh = 3600
Description = Jersey City facility, East Coast subscribers
Secret = Holland Tunnel
Table 8: ccagw.ini [gateway] Section

Parameter

Function

Address

Specifies the IPv4 address of the gateway.

NOTE: You cannot use IPv6 addresses with ccagw.ini.

TunnelRefresh

Specifies the number of seconds before the tunnel refreshes.

Default value is 0.

Description

Specifies a text string describing the gateway.

Secret

Specifies the shared secret used to authenticate communication between Steel-Belted Radius Carrier and the gateway device.

Parameter	Function
Address	Specifies the IPv4 address of the gateway. NOTE: You cannot use IPv6 addresses with ccagw.ini.
TunnelRefresh	Specifies the number of seconds before the tunnel refreshes. Default value is 0.
Description	Specifies a text string describing the gateway.
Secret	Specifies the shared secret used to authenticate communication between Steel-Belted Radius Carrier and the gateway device.

[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]